Harvard's Microrobotics Lab is publishing some amazing work regarding a MEMS fabrication technique for creating 3-dimensional millimeter-scale robots from 2-dimensional multi-layer components....
The AACC annual meeting hosts the largest clinical laboratory expo, and this year’s expo was probably the largest ever with an estimated 20,000 participants, close to 700 exhibiting companies, 2,000+ booths, and over half a million square feet of exhibit space!...
Key Tech predominately develops medical devices. About 80% of our work is electro-mechanical medical device development. The majority of the remaining 20% continues to be electro-mechanical hand-held and laboratory instruments, just not in the medical industry....
There are three major rapid prototyping techniques for making plastic parts fast; layer building, low-pressure molding/casting, and machining. Each has its advantages and drawbacks, depending on how you intend to use the part. Let's start with the various layer-building processes....
Key Tech recently hosted an alumni and friends networking event for the University of Maryland at our office in Federal Hill. Speakers included Key Tech CEO Jenny Regan, the Dean of the A. James Clark School of Engineering Dr. Darryll Pines, and the Provost and...
As you've probably noticed, wireless products are extremely popular. So, what is the difference between one wireless technology and another? Here's a really rough breakdown....
What is an embedded Real Time Operating System (RTOS) and how can you best utilize it for your next development project?...
As a service company, our staff is our most important asset. Without them, we'd just have a bunch of lonely computers sitting around hoping to one day become self-aware. As such, we work hard to find great people, and we've found some of the greatest....
Is it possible to verify and validate the safety and efficacy of medical devices if they could be connected to unknown current and future products? The medical device industry is working with the FDA to work out the safety issues of device interoperability. ...
As part of the V&V test procedure, we designed a gravimetric means to characterize the volumetric and flow-rate accuracy of a couple of precision injection instruments. With this setup, we're able to achieve measurement resolution of just 0.1 milligram and reduced the error due to...
